검색결과
-
[특집-ISO/IEC JTC 1/SC 17 활동] 35. Result of voting on SR Ballot for ISO/IEC 7811-7(N 7345)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-7(N 7345)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-7'은 ISO/IEC 7811-7:2018 (Ed 3)(restricted access)와 관련한 투표결과를 포함하고 있다.ISO/IEC 7811-7:2018 (Ed 3)(restricted access)는 Identification cards — Recording technique — Part 7: Magnetic stripe: High coercivity, high density에 관한 것이다.N 7345 문서는 N 7338, N 7339, N 7340, N 7341, N 7342, N 7343, N 7344 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of national expert input 22개국 등으로 나타났다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 34. Result of voting on SR ballot for ISO/IEC 7811-6(N 7344)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-6(N 7344)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-6'은 ISO/IEC 7811-6:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다.ISO/IEC 7811-6:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 6: Magnetic stripe: High coercivity에 관한 것이다.N 7344 문서는 N 7338, N 7339, N 7340, N 7341, N 7342, N 7343 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 11개국 △Revise/Amend 1개국 △Abstain lack of national expert input 23개국 등으로 나타났다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 33. Result of voting on SR ballot for ISO/IEC 7811-2(N 7343)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-2(N 7343)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-2'는 ISO/IEC 7811-2:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 7811-2:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 2: Magnetic stripe: Low coercivity에 관한 것이다. N 7343 문서는 N 7338, N 7339, N 7340, N 7341, N 7342 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of consensus 1개국 △Abstain lack of national expert input 21개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 32. Result of voting on SR Ballot for ISO/IEC 7811-1(N 7342)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 7811-1(N 7342)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 7811-1'는 ISO/IEC 7811-1:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 7811-1:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 1: Embossing에 관한 것이다. N 7342 문서는 N 7338, N 7339, N 7340, N 7341 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of consensus 1개국 △Abstain lack of national expert input 21개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 31. Result of voting on SR Ballot for ISO/IEC 18745-1(N 7341)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 18013-1(N 7340)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 18745-1'는 ISO/IEC 18745-1:2018 (Ed 2)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 18745-1:2018 (Ed 2)(restricted access)는 Test methods for machine readable travel documents (MRTD) and associated devices — Part 1: Physical test methods for passport books (durability)에 관한 것이다. N 7341 문서는 N 7338, N 7339, N 7340 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 9개국 △Revise/Amend 4개국 △Abstain lack of national expert input 22개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 30. Result of voting on SR Ballot for ISO/IEC 18013-12023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 18013-1(N 7340)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 18013-1'는 ISO/IEC 18013-1:2018 (Ed 2)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 18013-1:2018 (Ed 2)(restricted access)는 Information technology — Personal identification — ISO-compliant driving licence — Part 1: Physical characteristics and basic data set에 관한 것이다. N 7340 문서는 N 7338, N 7339 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 14개국 △Revise/Amend 1개국 △Abstain lack of national expert input 20개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 29. Result of voting on SR Ballot for ISO/IEC 15963-1 (M 7339)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 15963-1(N 7339)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 15963-1'는 ISO/IEC 15693-1:2018 (Ed 3) (restricted access)와 관련한 투표 및 투표 결과에 대한 내용이다. ISO/IEC 15693-1:2018 (Ed 3) (restricted access)의 주제는 Cards and security devices for personal identification — Contactless vicinity objects — Part 1: Physical characteristics이다.N 7339 문서는 N 7338 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 투표를 통해 의견을 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project? - 이하 생략 -
-
[특집-기술위원회] TC 195 - 건축 기계 및 장비(Building construction machinery and equipment)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 등이 있다.ISO/TC 195 건축 기계 및 장비(Building construction machinery and equipment)와 관련된 기술위원회는 1989년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 솽 리우(Mr Shuang LIU)가 책임지고 있다. 현재 의장은 징 리(Ms Jing Li)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 몬자 코르터(Ms Monja Korter), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen)등이다. 범위는 아래 내용을 포함한 건설 현장에서 사용되는 기계 및 장비 분야의 표준화다.표준화에 포함되는 내용은 △콘크리트 기계(예: 배처, 믹서, 펌프, 분무기, 운송, 진동기, 플로팅) △기초 기계(예: 말뚝 박기, 다이어프램 벽 설치, 흙 천공, 분사, 그라우팅, 토양 및 암석 혼합물용 드릴 장비) △골재 처리 기계(예: 스크리닝, 파쇄) △도로 건설 및 유지 관리 기계 및 장비 △터널 굴착 기계(TBM) 및 관련 기계 및 장비[예: 차폐 터널 보링 머신, 비차폐 터널 보링 머신, 텔레스코픽 쉴드 머신, 리머 머신, 마이크로 터널링 머신, 스러스트 보링 머신, 오거 보링 머신(채광용 제외), 에어록, TBM용 구조 챔버, 터널 보링 멀티서비스 차량(MSV)] △비계 등이다.또한 건축 자재의 생산 및 가공은 △자연석의 세공 △미세하고 무거운 점토 및 내화 세라믹 제조 △판유리, 중공유리, 특수유리의 생산, 처리, 가공 △현장에서 건축 자재를 처리하는 기계 및 장비 △도로 운영 기계 및 장비와 관련 서비스 △명명법 △애플리케이션 △분류 △평가 △기술 요구 사항 △테스트 방법 △안전 요구 사항 등을 포함한다.단, 고체 광물 물질 추출용 장비[예: 로드 헤더, 연속 광부, 착암기, 인상 천공기, 고벽 광부, LHD, 광산 오거 천공기), RMDS(신속 광산 개발 시스템)(ISO/TC 82)], 크레인(ISO/TC 96), 토공 기계 (ISO / TC 127), 승강 작업 플랫폼(ISO/TC 214), 건축 및 토목 공사(ISO/TC 59) 등은 제외한다.현재 ISO/TC 195 사무국과 관련해 발행된 표준은 39개며 ISO/TC 195 사무국의 직접적인 책임 하에 발행된 표준은 21개다.ISO/TC 195 사무국과 관련해 개발 중인 표준은 21개며 ISO/TC 195 사무국의 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 17개국, 참관 회원은 17개국이다.□ ISO/TC 195 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 11375:1998 Building construction machinery and equipment — Terms and definitions▷ISO/TR 12603:2010 Building construction machinery and equipment — Classification▷ISO 15642:2003 Road construction and maintenance equipment — Asphalt mixing plants — Terminology and commercial specifications▷ISO 15643:2020 Road construction and maintenance equipment — Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders — Terminology and commercial specifications▷ISO 15644:2002 Road construction and maintenance equipment — Chippings spreaders — Terminology and commercial specifications▷ISO 15645:2018 Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications▷ISO 15688:2012 Road construction and maintenance equipment — Soil stabilizers — Terminology and commercial specifications▷ISO 15689:2003 Road construction and maintenance equipment — Powder binder spreaders — Terminology and commercial specifications▷ISO 15878:2021 Road construction and maintenance equipment — Paver-finishers — Commercial specifications▷ISO 16039:2004 Road construction and maintenance equipment — Slipform pavers — Definitions and commercial specifications▷ISO 16039:2004/Amd 1:2013 Road construction and maintenance equipment — Slipform pavers — Definitions and commercial specifications — Amendment 1▷ISO 19432-1:2020 Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines — Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels▷ISO 19433:2008 Building construction machinery and equipment — Pedestrian-controlled vibratory plates — Terminology and commercial specifications▷ISO 19452:2008 Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications▷ISO 19452:2008/Cor 1:2008 Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications — Technical Corrigendum 1□ ISO/TC 195 사무국의 직접적인 책임 하에 개발 중인 표준 8개 목록▷ISO/AWI 19432-2 Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines — Part 2: Machines for abrasive chains — Safety requirements▷ISO/FDIS 20500-1 Mobile road construction machinery — Safety — Part 1: Common requirements▷ISO/FDIS 20500-2 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines▷ISO/FDIS 20500-3 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines▷ISO/FDIS 20500-4 Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines▷ISO/FDIS 20500-5 Mobile road construction machinery — Safety — Part 5: Specific requirements for paver-finishers▷ISO/FDIS 20500-6 Mobile road construction machinery — Safety — Part 6: Specific requirements for mobile feeders▷ISO/FDIS 20500-7 Mobile road construction machinery — Safety — Part 7: Specific requirements for slipform pavers and related machines□ ISO/TC 195 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 195/SC 1 Machinery and equipment for concrete work ; 발행된 표준 14개, 개발 중인 표준 4개▷ISO/TC 195/SC 2 Road operation machinery and associated equipment ; 발행된 표준 1개, 개발 중인 표준 1개▷ISO/TC 195/SC 3 Drilling and foundation machinery and equipment ; 발행된 표준 3개, 개발 중인 표준 8개
-
[특집-ISO/IEC JTC 1/SC 17 활동] 28. Result of voting on SR ballot for ISO/IEC 10373-32023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 10373-3' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동기술위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 10373-3'는 Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices에 관한 투표 및 결과에 대한 내용을 포함하고 있다.2023년 7월15일~12월2일 동안 투표 절차가 진행됐다. 다음과 같은 항목에 대해 회원국들로부터 의견을 물었다. 투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project? - 이하 생략 -
-
규제샌드박스로 신산업 혁신에 불 밝힌다한강 세빛섬에 대형 전광판(LED사이니지)을 설치하여 가족·연인들이 자연과 문화를 함께 즐길 수 있는 랜드마크로 탈바꿈한다. 산업통상자원부는 27일 「제4차 규제특례심의위원회」를 개최, 22개 과제를 승인했다고 밝혔다. 올해에만 160개*의 승인실적으로 신산업 생태계의 산파역할을 톡톡히 하고 있다. * 연도별 승인실적(건) : (‘19) 39 → (’20) 63 → (‘21) 96 → (’22) 129 → (‘23) 160 (누적: 487) ㈜세빛섬은 예빛섬, 가빛섬, 채빛섬에 영화관 스크린 규모의 대형 전광판을 설치하여 상업광고, 공익광고, 행사 콘텐츠 등을 송출한다. 하천구역에 광고물 설치가 제한되는 규제를 면제받았다. 세빛섬의 새로운 수익모델을 창출하는 한편, 반포 한강공원을 찾는 연 450만 명의 시민들에게 새로운 경험과 볼거리를 제공할 것으로 기대한다. 코스맥스펫은 반려동물용 의약외품 모듈 생산에 돌입한다. 현행 「동물용 의약품 등 취급규칙」은 모든 원료조합에 대하여 품목신고시 안정성 자료를 제출하고 있어 반려동물 연관산업 활성화를 위해 일부 품목에 대한 규제 특례를 승인했다. 신청기업은 품목신고가 완료된 주원료에 고객사 요청에 따라 향, 린스 등 부원료를 다양하게 조합하여 동물용 목욕용품을 제조할 계획이다. 또한 반려동물 음식점 동반출입(6개), 펫택시(1개) 특례를 추가로 승인했는데 이는 반려동물을 동반자로서 대하는 사회적 변화를 반영한 것이다. 액화수소 상용화 시대를 준비하는 2개 과제도 진행된다. 액화수소는 기체수소에 비해 용기 압력은 1/200 정도로 낮추어 안전성을 확보하고, 운송 용량은 10배 이상 향상 가능하여 경제성 측면에서도 수소경제의 지형을 바꿀 게임체인저로 주목받고 있다. 한국가스안전공사는 충북 음성군 금왕산단에 액화수소 검사지원센터를 구축하여 액화수소 관련 용기·제품의 성능과 안전성을 개발단계부터 평가한다. 민간도 발을 맞췄다. HD현대중공업과 하이리움산업은 액화수소 수송선에 실을 용기의 1/100 크기로 모형탱크를 제작하여 단열성능, 기밀성 등을 검증한다. 그 외에도 부산정관에너지는 기장군 정관신도시에서 3천여 세대와 상가를 대상으로 계절·시간별 차등요금제 등 신규 전기요금제를 도입하여 실증한다. 삼성전자는 혁신 가전제품 1종을 출시할 계획이다. 산업부 관계자는 “작은 변화가 모여서 혁신을 이루듯이 규제샌드박스 487개 과제가 신산업 생태계 저변을 확장하고 있다”면서, “내년부터는 정책적 중요성이 높은 첨단산업 분야의 실증과제를 선제적으로 기획하는 한편, 승인과제가 성공적으로 시장에 안착할 수 있도록 체계적인 사업화 지원을 추진할 계획”이라고 밝혔다.